Tubing Bender kit w/ 1.25x4.5 radius die set, and Tube Notcher

Description

PLEASE READ DESCRIPTION BELOW.
Our Tubing Bender is the BEST VALUE on the market!
Features:
Comes with a 1.25 OD tube die bending on a 4.5 CLR (Center Line Radius). Bends .083 to .188 wall tube.
90 degree bends in ONE ram cycle, over 180 degrees possible.
Bends vertical to save space and make it easier to use.
Accepts all RogueFab dies from 3.50" CLR up to 6.00" CLR.
Powered by compressed air, making it portable (no ground-mounting required).
Includes the base and degree wheel.
RAM NOT INCLUDED (sold at harbor freight, PN 97562, -89)
This is a WELD-TOGETHER kit for the bender, the Notcher is ready to use
Why should you buy a Tubing Bender from us? Price and performance. If you have shopped around, you have seen what other manufacturers charge for die sets. Or you have seen the benders that don't bend high strength tubing and only bend to 90 degrees. Why spend over 00 on a bender or make huge compromises in functionality when you could have bought a RogueFab bender and had all the features you need for less money?
This package includes our tubing bender, a 1.25x4.5 CLR die set, and our VersaNotcher tubing notcher. These are the tools shown in the photos. The photos show a fully assembled bender with a ram. The ram is PN 56215 at Harbor freight and is not included. They are -, and you can buy that locally to save yourself money on shipping.
The bender ships as a weld-together kit
. It takes about 2 hours to put together, and requires no drilling/cutting/grinding. anyone who can weld at all can do this. The photo showing the hole saw arbors for our VersaNotcher is to show how nice and short they are. The Notcher doesn't come with any hole saws and includes an arbor. Additional arbors and additional die sets for the bender are available at our web page.